Winnebago 1987-1989 LeSharo Service Manual page 544

DRIVE SHAFTS
OVERHAULING (SPIDER G182 COUPLING)
• Spread the greaseequally between the boot and
the yoke (150 gr.)
• Locate the boot lip in the grooves on the drive
shaft and on the cover.
• Mount the retaining ring over the boot.
• Insert a smooth round-ended piece of rod
between the boot and yoke to restrict the amount
of a.ir trapped inside the coupling.
• Lengthen or shorten the coupling to obtain
dimension A
=
162mm (63/8") (dimensiontaken
between the boot and face and the largest
diameter machined face on the yoke.)
• Remove the rod when in this position.
• Mount a new boot retaining clip and crimp with
an appropriate tool.
J8-6
1
i
j
-
)