COMPONENTS
COMPUTER
- REMOVE AND
REPLACE
The computer controls the ground connection to the
solenoid valve body along with input from the
speed sensor, RPM sensor and potentiometer.
It
ensures that all the electrical connections of the
automatic transmission are operating properly.
105
I
I
~:./'
"
.•....•.
-..,
---~.,'
.
_._---~:::~
..
,//
T
Before removing the computer (105) with its speed
sensor and multi-purpose switch, mark the harness
routing accurately and disconnect the battery.
REMOVAL
Remove the
following
from
the
automatic
transmission:
- the multi-purpose switch (C) and its ground lead
(H).
- the speed sensor and its seal. Disconnect
connectors
(5),
(T),
(V)
and
the
load
potentiometer
connector.
- Remove the computer.
F3-2