Winnebago 1987-1989 LeSharo Service Manual page 557

HEAVY DUTY REAR AXLE
CHANGING THE BEARINGS
I
• Remove the cotter pin and nutlock (1)
• Unscrew the nut, remove the thrust washer and
outer bearing
• Remove the hub-drum, extract the worn grease
seal and the bearing outer race.
Fitti ng extractor Rou. 898
• Fit locating sleeve (2) over the stub axle
• Slip over the 2 half-shells (1)
• Hold the complete assembly with sleeve (3)
Rou.898
• Usetool Rou. 898 and extractor Mot. 49 to extract
the inner bearing.
• Use a screwdriver to extract the deflector,
if
necessary.
K2-2
Mot. 49