Comfort Controls; Headlight Beam Change And Turn Signals; Windshield Wipers And Wiper Delay; Hazard Warning Flasher - Winnebago 2005 Minnie Winnie Owner's Manual

Table of Contents

SECTION 5

DASH / AUTO

HEADLIGHT BEAM CHANGE AND

TURN SIGNALS

Move multi-function lever upward for right

turn signal and downward for left turn signal.

Pull end of handle toward you to switch high

beam to low, or low beam to high.

WINDSHIELD WIPERS AND

WIPER DELAY

See your Ford chassis operating guide for

complete operating information.

HAZARD WARNING FLASHER

The hazard warning flasher provides addition-

al safety when the vehicle must be stopped on the

side of the roadway and presents a possible haz-

ard to other motorists. When the flasher is on, it

serves as a warning to the other drivers to ap-

proach and overtake your vehicle with caution.

The front directional signals and the taillights

will flash intermittently when the flashers are in

operation. The hazard warning flashers will not

operate when the service brake pedal is

depressed. The turn signal will not operate when

the flashers are on. When it is necessary to leave

the vehicle, the flasher system will continue to

operate with the ignition key removed.

CRUISE CONTROL

The electronic speed control (cruise) allows

you to maintain a steady speed and relieve driv-

ing strain while traveling long distances.

See your chassis operator manual for com-

plete instructions and precautions on the cruise

control.

5-2

WARNING

Do not operate the cruise control on

icy or extremely wet roads, winding

roads, in heavy traffic, or in any other

traffic situation where a constant

speed cannot be maintained.