Winnebago 1987-1989 LeSharo Service Manual page 521

LOWER SUSPENSION ARMS
CHANGING THE RUBBER BUSHINGS
A press is required for this operation after the arm
has been removed from the vehicle.
Use a piece of tube 37 mm bore (1.45") under the
arm on the press and a
35
mm
(1.37")
dia. mandrel to
push out the bushings.
When pressing in new bushings, they must be
symmetrical in relation to the mounting (shown by
dimension A) and there must be a distance of 207
mm (8.15") between them" as shown below.
A
A
(2) 37
A
207
mm
(8.15")
A
J3-3