Winnebago 1987-1989 LeSharo Service Manual page 543

DRIVE SHAFTS
OVERHAULING (SPIDER G182 COUPLING)
REASSEMBLING
When replacing the spider gear or boot:
• Lubricate the drive shaft and slide on the new
retaining clip and boot.
• Mount the spider gear onto the splined shaft.
!
I
)
• Crimp at 3 poi nts
1200
apart by peeni ng the metal
on the splines over onto the drive shaft.
• Remove the plastic retainer or adhesive tape.
• Mount the spider gear onto the yoke.
J8-5