Winnebago 1987-1989 LeSharo Service Manual page 539

DRIVE SHAFTS
REMOVING - REASSEMBLING
TIGHTENING TORQUES
Shock absorber base bolts 8 daNm (60 Ib./ft.)
Steering arm nut 3.5 daNm (26 Ib./ft.)
Drive shaft nuts 20. daNm (147 Ib./ft.)
Wheel nuts 12 daNm (90 Ib./ft.)
REMOVING
• Place the affected side on a stand and remove the
wheel.
• Remove:
- the drive shaft nut; prevent the hub from
turning with locking tool Rou. 604.
- the steering arm ball joint nut at the stub axle
carrier end using extractor T.Av. 476.
• Remove the 4 shock absorber bottom mounting
bolts on the MacPherson® strut.
• Tilt the stub axle carrier and release the drive shaft
at the wheel end.
J8-1
Rou.604