FINAL DRIVE REBUILD
DISASSEMBLY
• Remove the speedometer drive seal using tool
B.Vi. 905-02.
A
• Attach the extractor tool (A) equipped with the
nut (B) and the spacer (D).
• Screw in the tool (A) approximately three to four
turns after it has made contact with the seal so
that the thread (1) enters the rubber.
• Extract the seal by turning
the nut (B) while
holding the tool (A).
1
I
i
I
j
)
1
REMOVE:
• The lip seal (6) using tool B.Vi. 465.
F7-8
)
I
.I
:1
I
J