Dismantling - Winnebago 1987-1989 LeSharo Service Manual

FINAL DRIVE REBUILD
DISASSEMBLY
Dismantling
• Separate the converter· final drive housing from
the step down housing.
• Mark the position of the differential nut. Remove
the final drive half housing.
• Take out the differential.
• Remove the ring gear mounting bolts (they are
self-locking bolts that cannot be re-used). Leave
two in place, diametrically opposite one another.
• Extract the three bearings using special tools B.Vi.
28-01 and B.Vi. 48 or a bearing splitter.
F7-4
I
I
'.··.'1
,
n
\
:1
U
I