Winnebago 1987-1989 LeSharo Service Manual page 463

.
\
PRESSURE PLATE - DISC
CHANGING
The gearbox must be removed for this operation.
Removal
• Unscrew the ring of pressure plate bolts. Remove
the plate and the disc.
• Inspect all components and change any that are
worn or faulty.
REASSEMBLY
• Clean the flywheel friction face.
• Mount the disc (hub offset A facing gearbox) using
mandrel Emb. 786-01
• Tighten the pressure plate mounting bolts
gradually and evenly in a cross-pattern sequence.
Torque bolts to 2 daNm (22 Ib.lft.).
• Lightly grease the bearing surface for the thrust
pad.
H2-1