5-SPEED GEARBOX
DISASSEMBLY
- Simultaneously remove the fork, the 5th speed
sliding gear and the Reverse lever assembly.
- Place the sliding gear back onto the shaft, then
engage 5th gear and Reverseat the same time to
lock the primary shaft in place.
Remove the nut and washer from the primary
shaft.
- Pull the 5th gear hub using tool HB.Vi. 28-01 with
long jaws.
- Remove the following
parts:
- Synchronizer ring (46)
- 5th speed idle gear (58)
Needle bearing race (57) - Be careful not to lose
bearing
- Bushing (56)
Thrust washer (55)
.62
rl
l.1
)
l
G3-2