Winnebago 1987-1989 LeSharo Service Manual page 496

HANDBRAKESECONDARY CABLE
REMOVE AND REPLACE
• Remove the brake drum (see previous sections).
• Mount clip Fre. 05 astride the wheel cylinder.
• Unhook the top return spring.
• Disconnect the handbrake cable.
• Remove the cable stop in the backplate.
• Disconnect the cable under the floor.
REASSEMBLE
• Reconnect the cable under the floor, attach the
cable stop to the backplate.
• Connect the hand brake cable.
• Hook the top return spring.
• Remove wheel cylinder clip Fre. 05
• Mount the brake drum and adjust the bearing
endplay.
• Insert fresh grease in the cup and reassemble.
• Reassemble the rear wheel and torque tighten the
nuts with a torque wrench.
• Adjust the cable tension.
• Mount a new plastic plug to the backplate.
• Remove the brake drum and tire.
110-4
r
j
r
-I
I
!
•