Winnebago 1987-1989 LeSharo Service Manual page 482

FRONT BRAKE PADS
REMOVE AND REPLACE
• Mount the pads in position (they must be free to
slide.)
• The retaining peg (B) on replacement service pads
must be at the front (direction of wheel rotation).
B
~--o---'F
• Slip one end ofthe caliper between the spring clip
and the key location on the caliper bracket.
• Insert the other end by compressing both springs.
• Mount the first key, insert a screwdriver in the slot
for the second key, press on the screwdriver and
push the second key in.
• Remove the screwdriver and tap the key until fully
seated with a pin punch.
• Mount two new key retaining pins.
• Press the brake pedal several times to push the
pistons up into contact with the back of the pad.
14-3
\
i
1
".I
;j