Winnebago 1987-1989 LeSharo Service Manual page 82

ENGINE OVERHAUL
&
REBUILD
REASSEMBLY CYLINDER BLOCK ASSEMBLY
r
L
1.-'
FRONT AND REAR MAIN BEARING SUPPORT SIDE
SEALS (CONT.)
Method 2 (Cont.)
- Using a cloth, wipe away the excessmixture, both
inside and outside the cylinder block.
- PASS A STEEL WIRE THROUGH THE LUBRICATION
OIL WAYS TO CHECK THAT THEY ARE NOT
BLOCKED.
- Allow the assembly to dry for a few minutes, then
cut excess sealant from the joint face.
B3-31