Winnebago 1987-1989 LeSharo Service Manual page 517

FRONT AXLE ALIGNMENT
CENTERING THE STEERING WHEEL
I
[
With this operation it is not necessary to remove the
bellows to measure the steering center point:
- turn the steering wheel full lock in one direction
mark the top center of the rim at (A)
now turn the steering wheel on full opposite lock,
counting the number of complete turns and
fractions of a turn while doing so.
turn the steering wheel back half the number of
complete turns and half the fractions of a turn
noted. This is the steering center point.
Remove the steering wheel without moving the
setting and mount it to the splines with the spokes as
near horizontal as possible.
This is the "Steering straight ahead position".
I
I
,~
A
-\
\
\
\
\
Check that the steering wheel is centered and bring
it in the "straight ahead" position with spokes
horizontal (see above paragraph).
Prevent the steering wheel from turning using lock
Ms. 504-01.
J2-10
Ms. 504-01