GENERAL
WINDSHIELD
WIPERS
)
I
MECHANISM
REMOVAL
• Disconnect the battery
• Remove the air inlet elbow
• Remove:
- the windshield wiper arms
- windshield wiper arm spindle nuts
- connector
- and 2 bolts (G).
Remove the windshield wiper assembly.
SPECIAL POINT CONCERNING REASSEMBLY
With the motor in the "Stop" position, make sure
that crank (H) and link (I)
are
in line.
Remove and replace
the
motor
(Mechanism
removed).
1
J
I
q
I
)
REMOVAL
• Unscrew nut (2) holding the crank
• Unscrew screws (3).
SPECIAL POINTS CONCERNING REASSEMBLY
• Set the motor in the "Stop" position.
• Attach the motor to its plate, tighten crank (H)
when it is in line with link (I).
01-7