Winnebago 1987-1989 LeSharo Service Manual page 495

HANDBRAKE SECONDARY CABLE
REMOVE AND REPLACE
• Push the operating lever inward with a
screwdriver as shown to free peg (E) from the
brake shoe. (Access holes are provided in the
backplate and brake shoe.)
• When the peg is free, push the lever to the rear.
REMOVAL
• Release the handbrake
• Loosen the secondary cables to allow the
operating lever to return.
• Remove the plastic plug in the backplate and zero
the self-adjusting mechanism.
,
\
I
TIGHTENING TORQUE
Wheel nuts
12 daNm
(90
Ib.lft.)
110·3