Winnebago 1987-1989 LeSharo Service Manual page 678

CHANGING TH E FRONT SECTION
PREPARATION
After grinding the joints smooth, apply a coat of
plastic filler or zinc-based paint to the new panel to
prevent rust forming.
REFITTING
C
Mount and align the new inner wing panel front -\
section followed by the headlight panel. Hold these \
panels with vice-grips.
Spotweld the following joints:
-A : Sidemember - inner wing panel
-8 : Inner wing panel - pillar lining
-D : Headlight panel - pillar lining
-E : Headlight panel - pillar lining
Seam braze:
-C : Inner wing panel
Apply strips of SC4 sealer to the following joints:
-8 : Pillar lining - inner wing panel
-C : Inner wing panel - side section
-E : Headlight panel - inner wing panel
\
\~
I
I
)
]
Apply undercoating material to the inner wing
panel.
P1-30