REAR BRAKE SHOES
REMOVE
AND
REPLACE
I
Rear Brake Drums Must
Be Removed For This
Operation. See Rear Axle Section.
REMOVAL
• Unhook bottom return spring (1) followed by top
return spring (2).
• Fit wheel cylinder clip Fre. 05 astride the cylinder.
• Using the same shoe locator tool or a piece of
tube, remove the spring retaining cup locating
brake shoe (1) by pressing it in and turning.
• Remove the cup and spring followed
by brake
shoe (1) and threaded body (2).
• Disconnect the hand brake cables at the swivel
(where the cables meet).
• Remove the spring
retaining
cup and spring
locating brake shoe (3).
17-1