Winnebago 1987-1989 LeSharo Service Manual page 91

ENGINE OVERHAUL
&
REBUILD
REASSEMBLE CYLINDER BLOCK ASSEMBLY
INSTALL OR CONNECT
• Insert the intermediate shaft, secure it by its
flange plate.
• Install timing belt tightener. Do not tighten at this
time.
• Position the intermediate shaft cover with a new
paper gasket and new oil seal. Use inserting tool
Mot. 790 in order not to damage the seal lip and
to assist cover location.
• Coat the bolt threads with one or two drops of
Loctitee or equivalent, since the holes pass
through the cylinder block which could lead to oil
leaks.
IMPORTANT
A washer 1 mm (.040") thick must be placed
between the oil seal and the inserting tool so that
the seal lip rides on a fresh surface if the
intermediate shaft has been marked by the old oil
seal.
A. Position when inserted with Tool Mot. 790.
B. Position when inserted with Mot. 790 plus a
mm washer after overhaul.
83-40
I'
I
I
(
r""
!)
L
t
l.
[