Winnebago 1987-1989 LeSharo Service Manual page 414

5-SPEED GEARBOX
DISASSEMBLY
- Shift the transmission into 4th gear. Then remove
the roll pin connecting the "dogleg" (71) to the
3rd/4th gear shaft using tool #B.Vi. 31-01.
1
I
J
Remove :
The locking assemblies (V).
The three springs are identical.
- Remove the three detent assemblies. Be careful to
return the piston and balls to their proper
locations when reassembling transmission. The
piston should be located on the reverse rod. The
springs, however, are interchangeable.
G3-4
--I
J
J