t\
REBUILD
DISASSEMBL Y
• Take out the speedometer drive seal using tool
B.Vi. 905-02.
• Fit the extractor tool (A) equipped with the nut (B)
and the spacer (D).
• Screw in the tool (A) by approximately
three to
four turns after it has made contact with the seal
so that the thread (1) enters the rubber.
• Extract the seal by turning
the nut (B) while
holding the tool (A).
A
B 0
J
REMOVE:
• The lip seal (6) using tool S.vi. 465.
G3·13