Winnebago 1987-1989 LeSharo Service Manual page 510

FRONT AXLE ALIGNMENT
STEERING BOX HEIGHT SETTING
Method with compression
• Use height gauge T.Vi. 605-04 to measure heights
H1 and H2.
T.Av. 605-04'
• Compress the front axle.
• Place tool T.Av. 549 on the tire and hold it to the
wing with magnetic base (1). Adjust measuring
rod (2) so that it is vertical and in the low position.
• Tighten screw (3)
T.Av.549
1=
. I
)
• Attach a scaleboard (T.Av. 552) to the bottom of
each door by means of its magnetic base so that A
=
1.30 m (51 5/32") from the front wheel center.
• Mount a measuring instrument on each side so
that the beam lines up with cross B on the
scaleboard.
T.Av.552
J2-3
,
I
.J