ENGINE OVERHAUL
&
REBUILD
REASSEMBLE CYLINDER BLOCK ASSEMBLY
INSTALL OR CONNECT
The core plugs must not be removed (frost plugs):
• check that each cylinder head bolt screws in easily.
• screw the bolts in and out several times if required
to ease the threads.
TIGHTEN
If the oil galley
plugs have been removed,
reinstall and tighten them to:
• Plug 1
8 daNm (60 Ib.lft.)
• Plug 2
2 daNm (15 Ib.lft.)
• All other plugs
4 daNm (30 Ib.lft.)
INSTALL OR CONNECT
• Insert the dipstick guide tube with its flange in
contact with the block.
• Rub the outside of the dipstick tube with emery
cloth if necessary to make ~t enter easier and
coat the stem with Loctite
or equivalent.
• Attach the cylinder block to support Mot. 792.
,
"
l
f
83-24