Winnebago 1987-1989 LeSharo Service Manual page 518

FRONT AXLE ALIGNMENT
PARALLELISM
Measure the toe and then how it is divided between
the two sides either in relation to the rear wheels
(dimension A) or in relation to the body sides
(dimension G).
ADJUSTING
There are several possibi Iities:
i
.
)
Toe-In
Toe-Out Correction to be made INCORRECT
Turn each steering arm rod (or end fitting) an equal number
of turns but in opposite directions to obtain values A and G which are equal both sides.
CORRECT
Adjust the toe-in on both sides to the same value making
sure that values (A and G) remain the same.
INCORRECT
Adjust the toe-in first to the correct value, then adjust the
toe-out.
Toe-out
1 complete turn 30' (3 mm) of toe-in or toe-out.
J2-"