REBUILD
DISASSEMBLY
Dismantling:
• Free the clutch-final drive housing from the step
down housing.
• Mark the position of the differential
nut. Remove
the final drive half housing.
• Take out the differential
• Remove the ring gear bolts (they are self-locking
bolts that cannot be re-used). Leave two in place,
diametrically
opposite to one another.
• Extract the three bearings using special tools B.Vi.
28-01 and B.Vi. 48.
G3-10
avi.
28-01
B.Vi.
48
-J
"']
--j I,.