STEERING BOX
ADJUSTING THE PLUNGER
• Place the vehicle on a frame hoist and remove the
front wheels.
• Unlock adjusting nut (5) by raising locking tabs
(A).
• Torque tighten the adjusting nut to 1 daNm
..±.
0.2
(7 1/2 Ib.lft.) using a 10 mm allen wrench. The
steering wheel should be fairly hard to turn at this
point.
• Next, back off the nut 1/4 turn. The steering
should now be free turning without
any hard
spots.
• Lock the nut by bending the nut flange down into
two opposite notches in the steering box.
J5-5