Flywheel/Drive Plate Installation - Winnebago 1987-1989 LeSharo Service Manual

ENGINE OVERHAUL
&
REBUILD
REASSEMBLE CYLINDER BLOCK ASSEMBLY
INSTALL OR CORRECT
• Position the oil pan gasket and install the oil pan.
• Tighten the retaining bolts to .8-1.0 daNm (5.8-7.3
Ib.lft.)
FLYWHEEl/DRIVE PLATE INSTALLATION
INSTALL OR CONNECT
• Apply Loctite~ or equivalent, on the crankshaft
mating surface for the flywheel/drive plate.
• Position the flywheel/drive plate on the crankshaft
and install Holding Tool Mot. 582.
NOTE: The original flywheel/drive plate self-locking
bolts are not reusable. Use replacement bolts
for each installation.
• Tighten the flywheel bolts to 6.0 daNm (44 Ib.lft.)
torque.
• Tighten the drive plate bolts to 6.8 daNm (50
Ib.lft.) torque.
• Do not remove Holding Tool.
83-38
Mot. 582
(
I
\
J
I
[
[
J
~
L
L
(
!..