Winnebago 1987-1989 LeSharo Service Manual page 464

FLYWHEEL
REMOVE AND REPLACE
The gearbox and clutch must be removed for this
operation.
TIGHTENING TORQUES
Flywheel bolts: 6 daNm (45 Ib.lft.)
Removal
• Mount locking sector Mot. 582.
• Unlock (if applicable) and unscrew the flywheel
bolts.
• These are self-locking bolts which cannot be
Mot.
582
reused.
• Remove the flywheel.
IMPORTANT
• The flywheel friction face cannot be resurfaced.
• The flywheel must be changed if unservicable.
REASSEMBLY
• Use a dry cloth to clean the threaded holes in the
crankshaft.
• Degrease the flywheel locating face on the
crankshaft.
• Apply Loctite@ or equivalent to the mating faces.
• Mount the flywheel, coat the bolt threads with 1
or 2 drops of Loctite @and insert new self-locking
bolts through new lockplate.
• Torque tighten the bolts using a torque wrench.
• Bend the lockplate tabs onto one hexagon only on
each bolt.
H3-1
r\
U
1
. J
I