Display Ip Interface Brief - H3C S3100 Series Command Manual

Command Manual ( For Soliton ) – Management VLAN
H3C S3100 Series Ethernet Switches
Table 1-2 Description on the fields of the display ip interface command
Vlan-interface1 current state
Line protocol current state
Internet Address
Broadcast address
The Maximum Transmit Unit
IP packets input number: 11790, bytes:
550920, multicasts: 3049
IP packets output number: 8374, bytes:
404537, multicasts: 0
TTL invalid packet number
ICMP packet input number
Echo reply
Unreachable
Source quench
Routing redirect
Echo request
Router advert
Router solicit
Time exceed
IP header bad
Timestamp request
Timestamp reply
Information request
Information reply
Netmask request
Netmask reply
Unknown type

1.1.4 display ip interface brief

Syntax
display ip interface brief [ Vlan-interface [ vlan-id ] ]
Field
1-4
Chapter 1 Management VLAN Configuration
Description
Current state of Vlan-interface1
Current state of the link layer protocol
IP address
Broadcast address
The maximum transmit unit (MTU)
Number of received/sent packets (total),
bytes, and multicast packets.
Number of received packets with TTL
errors
Number of received ICMP messages
Echo replies
Unreachable messages
Source quench messages
Routing redirect messages
Echo requests
Router advertisements
Router solicit messages
Time exceed messages
IP header bad messages
Timestamp requests
Timestamp replies
Information requests
Information replies
Netmask requests
Netmask replies
Messages with unknown type
Commands