H3C S3100 Series Command Manual page 411

Command Manual (For Soliton) – AAA
H3C S3100 Series Ethernet Switches
radius-scheme radius-scheme-name | hwtacacs-scheme hwtacacs-scheme-name |
vlan vlan-id | ucibindex ucib-index | user-name user-name ]
View
Any view
Parameters
access-type { dot1x | mac-authentication }: Displays user connections of a specified
access type. Here, dot1x is used to display all 802.1x user connections, and
mac-authentication is used to display all MAC authentication user connections.
domain isp-name: Displays all user connections under specified ISP domain. Here,
isp-name is the name of an ISP domain, a string of up to 128 characters. You can only
specify an existing ISP domain.
interface interface-type interface-number: Displays all user connections on a specified
port.
ip ip-address: Displays all user connections with a specified IP address.
mac mac-address: Displays the user connection with a specified MAC address. Here,
mac-address is in hexadecimal format (in the form of H-H-H).
radius-scheme radius-scheme-name: Displays all user connections using a specified
RADIUS scheme. Here, radius-scheme-name is a string of up to 32 characters.
hwtacacs-scheme hwtacacs-scheme-name: Displays all user connections using a
specified RADIUS scheme. Here, hwtacacs-scheme-name is a string of up to 32
characters.
vlan vlan-id: Displays all user connections of a specified VLAN. Here, vlan-id ranges
from 1 to 4094.
ucibindex ucib-index: Displays the user connection with a specified connection index.
Here, ucib-index ranges from 0 to 1047.
user-name user-name: Displays the connection of a specified user. Here, user-name is
a character string in the format of pure-username@domain-name. The pure-username
cannot be longer than 55 characters, the domain-name cannot be longer than 24
characters, and the entire user-name cannot be longer than 184 characters.
Description
Use the display connection command to display information about specified or all
user connections.
If you execute this command without specifying any parameter, all user connections will
be displayed.
This command cannot display information about the connections of FTP users.
Related commands: cut connection.
Chapter 1 AAA Configuration Commands
1-11