Port-Group - H3C S3100 Series Command Manual

Command Manual (For Soliton) – Port Basic Configuration
H3C S3100 Series Ethernet Switches
Parameter
interface-list:
interface-type interface-number [ to interface-type interface-number ] &<1-10>, where
&<1-10> indicates that you can specify up to 10 port ranges.
Description
Use the port command to add Ethernet interface(s) to a specified port group.
Use the undo group-member command to remove specified Ethernet interface(s)
from a port group.
By default, a port group is empty, that is, there is no Ethernet interface in it.
Note:
A port can not be added to a port group if it has been added to an aggregation group,
and vice versa.
Example
# Add the interface Ethernet 1/0/2~Ethernet1/0/5 to the port group1.
<Sysname> system-view
[Sysname] port-group 1
[Sysname-port-group-1] port Ethernet 1/0/2 to Ethernet 1/0/5

1.1.28 port-group

Syntax
port-group
undo port-group
View
System view
Parameter
group-id: Number of port group, in the range of 1 to 100.
Description
Use the port-group command to create a port group or enter the specified port group
view.
Ethernet interface
1-33
Chapter 1 Port Basic Configuration
list, in the
Commands
format of