H3C S3100 Series Command Manual page 548

Command Manual (For Soliton) – ACL
H3C S3100 Series Ethernet Switches
Example
# Configure an IPv6 ACL template to match the source address and destination
address fields in IPv6 packets.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] ipv6-acl-template src-ip dest-ip
1.1.9 packet-filter
Syntax
packet-filter inbound acl-rule
undo packet-filter inbound acl-rule
View
System view, Ethernet port view, Port group view
Parameters
inbound: Filters inbound packets.
acl-rule: ACL/ACL rules to be applied. This argument can be one of those listed in
1-5.
Table 1-5 Combined application of ACLs
Apply all the rules of an ACL that is of IP
type (The ACL can be a basic ACL or an
advanced ACL.)
Apply a rule of an ACL that is of IP type
(The ACL can be a basic ACL or an
advanced ACL.)
Apply all the rules of a Layer 2 ACL
Apply a rule of a Layer 2 ACL
Apply all rules of an IPv6 ACL
Apply a rule of an IPv6 ACL
Apply a rule of an ACL that is of IP type
and a rule of a Layer 2 ACL
In Table
The ip-group acl-number keyword specifies a basic or an advanced ACL. The
acl-number argument ranges from 2000 to 3999.
Combination mode
1-5:
Chapter 1 ACL Configuration Commands
The acl-rule argument
ip-group acl-number
ip-group acl-number rule rule-id
link-group acl-number
link-group acl-number rule rule-id
user-group acl-number
user-group acl-number rule rule-id
ip-group acl-number rule rule-id
link-group acl-number rule rule-id
1-9
Table