H3C S3100 Series Command Manual page 844

Command Manual (For Soliton) – FTP-SFTP-TFTP
H3C S3100 Series Ethernet Switches
Examples
# Connect to the FTP server whose IP address is 2.2.2.2.
<Sysname> ftp 2.2.2.2
Trying ...
Press CTRL+K to abort
Connected.
220 FTP service ready.
User(none):admin
331 Password required for admin.
Password:
230 User logged in.
[ftp]
1.2.11 get
Syntax
get remotefile [ localfile ]
View
FTP client view
Parameters
remotefile: Name of a file to be downloaded.
localfile: File name used when a file is downloaded and saved to the local device. If this
argument is not specified, the source file name is used when a file is saved and
downloaded to the local device.
Description
Use the get command to download a remote file and save it as a local file.
Caution:
When using the get command to download files from a remote FTP server, note to limit
the length of file path and file name within the following ranges:
A directory name should be no more than 91 characters.
A file name plus its local path name should be no more than 127 characters.
A device name should be no more than 14 characters.
A file name plus its complete path name should be no more than 142 characters.
Chapter 1 FTP and SFTP Configuration
1-13
Commands