Display Cpu - H3C S3100 Series Command Manual

Command Manual (For Soliton) – System Maintenance and Debugging
H3C S3100 Series Ethernet Switches
Table 3-1 Description for the fields of the display boot-loader command
The current boot app is
The main boot app is
The backup boot app is

3.1.4 display cpu

Syntax
display cpu [ unit unit-id ]
View
Any view
Parameter
unit-id: Unit ID of a switch, the value can only be 1.
Description
Use the display cpu command to display the CPU usage.
Example
# Display the CPU usage of this switch.
<Sysname> display cpu
Unit 1
Board 0 CPU busy status:
16% in last 5 seconds
16% in last 1 minute
16% in last 5 minutes
Table 3-2 Description for the fields of the display cpu command
CPU busy status
16% in last 5 seconds
16% in last 1 minute
16% in last 5 minutes
Field
Field
CPU usage status.
The CPU usage in the last five seconds is 16%.
The CPU usage in the last one minute is 16%.
The CPU usage in the last five minutes is 16%.
Description
Current boot file of the system
Main boot file of the system (default boot file)
Backup boot file of the system
Description
3-3
Chapter 3 Device Management
Commands