H3C S3100 Series Command Manual page 131

Command Manual (For Soliton) – IP Address-IP Performance
H3C S3100 Series Ethernet Switches
Reassembling:sum
Table 2-4 Description on the fields of the display ip statistics command
Input:
Output:
Fragment:
Reassembling
:
0
Field
sum Total number of packets received
Total number of packets with destination being
local
local
Total number of unknown protocol packets.
Unknown protocol packets are destined to the local
device, but the upper layer protocol specified in
bad protocol
their IP header cannot be processed by the device.
(For example, if a switch is not enabled with the
Layer 3 multicast function, it considers IGMP
packets as unknown protocol packets.)
Total number of packets with incorrect header
bad format format that contains a wrong version, or has a
header length less than 20 bytes.
bad
Total number of packets with incorrect checksum
checksum
bad options Total number of packets with incorrect option
Total number of IP packets forwarded by the local
forwarding
device
Total number of IP packets initiated from the local
local
device
dropped Total number of IP packets discarded
Total number of IP packets for which no route is
no route
available
compress
Total number of IP packets failed to compress
fails
input Total number of fragments received
output Total number of fragments sent
dropped Total number of fragments discarded
Total number of IP packets successfully
fragmented
fragmented
couldn't Total number of IP packets that cannot be
fragment fragmented
sum Total number of IP packets reassembled
timeouts Total number of reassembly timeout IP packets
2-10
Chapter 2 IP Performance Configuration
timeouts 0
Description
Commands