Command Manual (For Soliton) – Link Aggregation
H3C S3100 Series Ethernet Switches
1.1.11 reset lacp statistics
Syntax
reset lacp statistics [ interface interface-type interface-number [ to interface-type
interface-number ] ]
View
User view
Parameter
interface-type: Port type
interface-number: Port number
to: Specifies a port index range, with the two interface-type interface-number argument
pairs around it as the two ends.
Description
Use the reset lacp statistics command to clear LACP statistics on specified port(s), or
on all ports if no port is specified.
Related command: display link-aggregation interface.
Example
# Clear LACP statistics on all Ethernet ports.
<Sysname> reset lacp statistics
Chapter 1 Link Aggregation Configuration
1-10
Commands