Display Fib Acl - H3C S3100 Series Command Manual

Command Manual (For Soliton) – IP Address-IP Performance
H3C S3100 Series Ethernet Switches
Description
Use the display fib ip-address command to view the FIB entries matching the specified
destination IP address.
If no mask or mask length is specified, the FIB entry that matches the destination IP
address and has the longest mask will be displayed; if the mask is specified, the FIB
entry that exactly matches the specified destination IP address and mask will be
displayed.
Examples
# Display FIB entry information which matches destination 12.158.10.0 and has a mask
length no less than eight.
<Sysname> display fib 12.158.10.0 longer
Route Entry Count: 1
Flag:
U:Usable
R:Reject
Destination/Mask
12.158.10.0/24
# Display FIB entry information which has a destination in the range of 12.158.10.0/24
to 12.158.10.6/24 and has a mask length of 24.
<Sysname> display fib 12.158.10.0 255.255.255.0 12.158.10.6 255.255.255.0
Route Entry Count: 1
Flag:
U:Usable
R:Reject
Destination/Mask
12.158.10.0/24
For details about the displayed information, see

2.1.3 display fib acl

Syntax
display fib acl acl-number
View
Any view
Parameters
acl-number: Basic ACL number, in the range of 2000 to 2999.
G:Gateway H:Host
E:Equal cost multi-path
Nexthop
12.158.10.1
G:Gateway H:Host
E:Equal cost multi-path
Nexthop
12.158.10.1
2-3
Chapter 2 IP Performance Configuration
B:Blackhole D:Dynamic
L:Generated by ARP or ESIS
Flag TimeStamp
U t[85391]
B:Blackhole D:Dynamic
L:Generated by ARP or ESIS
Flag TimeStamp
U t[85391]
Table 2-1.
Commands
S:Static
Interface
Vlan-interface10
S:Static
Interface
Vlan-interface10