H3C S3100 Series Command Manual page 100

Command Manual ( For Soliton ) – Management VLAN
H3C S3100 Series Ethernet Switches
View
Any view
Parameter
regular-expression: Regular expression, which specifies a match character string.
|: Uses the regular expression to match the output routing information.
begin: Displays the routing information from the route entry containing the specified
character string.
include: Displays all routing information containing the specified character string.
exclude: Displays all routing information without the specified character string.
Description
Use the display ip routing-table command to display the summary information about
the routing table.
This command displays the summary information about a routing table, with the items
of a routing entry contained in one line. The information displayed includes destination
IP address/mask length, protocol, preference, cost, next hop and outbound interface.
The display ip routing-table command only displays the routes currently in use, that is,
the optimal routes.
Example
# Display the summary information about the routing table.
<Sysname> display ip routing-table
Routing Table: public net
Destination/Mask
127.0.0.0/8
127.0.0.1/32
Table 1-4 Description on the fields of the display ip routing-table command
Destination/Mask
Protocol
Pre
Cost
Nexthop
Interface
Protocol Pre
DIRECT
DIRECT
Field
Destination IP address/mask length
Routing protocol that discovers the route
Route preference
Route cost
Next hop IP address of the route
Outbound interface, through which packets destined for the
destination network segment are to be transmitted
Chapter 1 Management VLAN Configuration
Cost Nexthop
0 0 127.0.0.1
0 0 127.0.0.1
Description
1-6
Commands
Interface
InLoopBack0
InLoopBack0