Sftp Client Configuration Commands - H3C S3100 Series Command Manual

Command Manual (For Soliton) – FTP-SFTP-TFTP
H3C S3100 Series Ethernet Switches
View
System view
Parameters
time-out-value: Timeout time, in the range 1 to 35,791, in minutes. The default value is
10.
Description
Use the sftp timeout command to set the idle timeout time on an SFTP server.
Use the undo sftp timeout command to restore the idle timeout time to the default
value.
If the idle timeout time exceeds the specified threshold, the system disconnects the
SFTP user automatically.
Examples
# Set the idle timeout time to 500 minutes.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] sftp timeout 500

1.4 SFTP Client Configuration Commands

1.4.1 bye
Syntax
bye
View
SFTP client view
Parameters
None
Description
Use the bye command to terminate a connection with the remote SFTP server and
return to system view.
This command has the same effect as that of the commands exit and quit.
Examples
# Terminate the connection with the remote SFTP server.
sftp-client> bye
Chapter 1 FTP and SFTP Configuration
1-24
Commands