Destination-Ip - H3C S3100 Series Command Manual

Command Manual (For Soliton) – HWPing
H3C S3100 Series Ethernet Switches
View
HWPing test group view
Parameters
size: Size of a test packet in bytes. The value range varies with the test types.
Table 1-1 Value range of the HWPing test packets
Jitter
ICMP
Udpprivate
Udppublic
The packet size configuration applies to ICMP, UDP, and jitter tests only.
Description
Use the datasize command to configure the size of a test packet in a test.
Use the undo datasize command to restore the default.
Examples
# Set the size of ICMP test packets to 50 bytes.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] hwping administrator icmp
[Sysname-hwping-administrator-icmp] test-type icmp
[Sysname-hwping-administrator-icmp] datasize 50

1.1.3 destination-ip

Syntax
destination-ip ip-address
undo destination-ip
View
HWPing test group view
Parameters
ip-address: Destination IP address of a HWPing (pronounced Hua'Wei Ping) test.
Test type
68 to 8100
4 to 8100
4 to 8100
4 to 8100
Value range (in bytes)
1-2
Chapter 1 HWPing Commands
Default (in bytes)
68
56
100
100