Stp Region-Configuration - H3C S3100 Series Command Manual

Command Manual (For Soliton) – MSTP
H3C S3100 Series Ethernet Switches
If you do not specify the instance-id argument, the two commands apply to only the
CIST.
Examples
# Set the bridge priority of the switch in MSTI 1 to 4,096.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] stp instance 1 priority 4096

1.1.44 stp region-configuration

Syntax
stp region-configuration
undo stp region-configuration
View
System view
Parameters
None
Description
Use the stp region-configuration command to enter MST region view.
Use the undo stp region-configuration command to restore the MST region-related
settings to the default.
MST region-related parameters include: region name, revision level, and
VLAN-to-MSTI mapping table. By default:
MST region name is the first MAC address of the switch
All VLANs are mapped to the CIST in the VLAN-to-MSTI mapping table
The MSTP revision level is 0
You can modify the three parameters after entering MST region view by using the stp
region-configuration command.
Note:
NTDP packets sent by devices in a cluster can be transmitted in only the instances
where the management VLAN of the cluster resides.
Chapter 1 MSTP Configuration Commands
1-49