H3C S3100 Series Command Manual page 480

Command Manual (For Soliton) – AAA
H3C S3100 Series Ethernet Switches
1.3.18 timer realtime-accounting
Syntax
timer realtime-accounting minutes
undo timer realtime-accounting
View
HWTACACS scheme view
Parameters
minutes: Real-time accounting interval, in minutes. It ranges from 3 to 60 and must be a
multiple of 3.
Description
Use the timer realtime-accounting command to set the real-time accounting interval.
Use the undo timer realtime-accounting command to restore the default real-time
accounting interval.
By default, the real-time accounting interval is 12 minutes.
Note that:
To control the interval at which users are charged in real time, you can set the
real-time accounting interval. After the setting, the switch periodically sends online
users' accounting information to TACACS accounting server at the set interval.
The setting of the real-time accounting interval depends, to some degree, on the
performance of the switch and the TACACS server. The higher the performance of
the switch and the TACACS server is, the shorter the interval can be. It is
recommended to set the interval as long as possible when the number of users is
relatively great (≥1000). The following table lists the recommended intervals for
different numbers of users.
Table 1-7 Numbers of users and recommended intervals
1 to 99
100 to 499
500 to 999
≥1000
Examples
# Set the real-time accounting interval in HWTACACS scheme hwt1 to 51 minutes.
Number of users
Chapter 1 AAA Configuration Commands
Real-time accounting interval
3
6
12
≥15
1-80