Display Version - H3C S3100 Series Command Manual

Command Manual (For Soliton) – System Maintenance and Debugging
H3C S3100 Series Ethernet Switches
Description
Use the display debugging command to display enabled debugging on a specified
device.
Example
# Display enabled debugging on unit 1.
<Sysname> display debugging unit 1
ARP packet debugging switch is on
TCP:
TCP packet debugging switch is on for task any socket any
IP icmp debugging is on

1.2.3 display version

Syntax
display version
View
Any view
Parameter
None
Description
Use the display version command to display the version information about the switch
system.
Specifically, you can use this command to check the software version and release time,
the basic hardware configuration, and some other information about the switch.
Example
# Display the version information of the system.
<Sysname> display version
H3C Comware Platform Software.
Comware Software, Version 3.10, Alpha 2101
Copyright (c) 2004-2007 Hangzhou H3C Technologies Co., Ltd. All rights
reserved.
H3C S3100-26TP-EI-W uptime is 0 week, 0 day, 19 hours, 40 minutes
H3C S3100-26TP-EI-W with 1 Processor
64M bytes SDRAM
1-8
Chapter 1 Basic System
Configuration and Debugging
Commands