Display Hwping - H3C S3100 Series Command Manual

Command Manual (For Soliton) – HWPing
H3C S3100 Series Ethernet Switches
By default, no destination port number is configured for a test.
Related commands: destination-ip.
Note:
The destination-port command has effect on jitter, TCP-Private, and UDP-Private
tests only.
You are not recommended to perform a TCP, UDP, or jitter test on a well-known port
(ports with a number ranging from 1 to 1023) or on a port with a port number greater
than 50000. Otherwise, the HWPing test will fail or the corresponding service of the
well-known port will become unavailable.
Examples
# Set the destination port number for a tcpprivate test to 9000.
<Sysname> system-view
System View: return to User View with Ctrl+Z
[Sysname] hwping administrator tcp
[Sysname-hwping-administrator-tcp] test-type tcpprivate
[Sysname-hwping-administrator-tcp] destination-port 9000

1.1.5 display hwping

Syntax
display hwping { results | history } [ administrator-name operation-tag ]
View
Any view
Parameters
results: Displays results of the last test.
history: Displays the history records of tests.
administrator-name: Name of the administrator who created the HWPing test operation,
a string of 1 to 32 characters.
operation-tag: Operation tag, a string of 1 to 32 characters.
Description
Use the display hwping command to display the result of the last HWPing test or the
history of HWPing tests.
1-4
Chapter 1 HWPing Commands