Voice Vlan - H3C S3100 Series Command Manual

Command Manual (For Soliton) – Voice VLAN
H3C S3100 Series Ethernet Switches
Parameters
vlan-id: Specifies the ID of the current voice VLAN in the range of 1 to 4094.
Description
Use the display vlan command to display information about the specified VLAN.
For the voice VLAN, this command displays all the ports in the VLAN.
Related commands: voice vlan, voice vlan enable.
Examples
# Display all the ports in the current voice VLAN, assuming that the current voice VLAN
is VLAN 6.
<Sysname> display vlan 6
VLAN ID: 6
VLAN Type: static
Route Interface: not configured
Description: VLAN 0006
Name: VLAN 0006
Tagged
Ethernet1/0/5
Untagged Ports:
Ethernet1/0/6
The output indicates that Ethernet 1/0/5 and Ethernet 1/0/6 are in the voice VLAN.

1.1.5 voice vlan

Syntax
voice vlan vlan-id enable
undo voice vlan enable
View
System view
Parameters
vlan-id: Specifies the ID of the VLAN to be enabled with the voice VLAN function, in the
range of 2 to 4094. Note that the VLAN must already exist.
Description
Use the voice vlan command to configure the specified VLAN as the voice VLAN, that
is, enable voice VLAN globally.
Ports:
Chapter 1 Voice VLAN Configuration
1-4
Commands