Display Current-Configuration Vlan - H3C S3100 Series Command Manual

Command Manual (For Soliton) – Configuration File Management
H3C S3100 Series Ethernet Switches
interface Ethernet1/0/22
interface Ethernet1/0/23
interface Ethernet1/0/24
interface GigabitEthernet1/1/1
interface GigabitEthernet1/1/2
interface GigabitEthernet1/2/1
interface GigabitEthernet1/2/2
# Display the configuration information starting with the string user.
<Sysname> display current-configuration | include ^user
user-interface aux 0
user-interface vty 0 4

1.1.2 display current-configuration vlan

Syntax
display current-configuration vlan [ vlan-id ] [ by-linenum ]
View
Any view
Parameters
vlan vlan-id: VLAN ID, in the range 1 to 4094.
by-linenum: Displays configuration information with line numbers.
Description
Use the display current-configuration vlan command to display the current VLAN
configuration of the switch.
Without the vlan-id argument specified, this command displays configuration
information about all the VLANs that exist on the switch.
If there are contiguous VLANs without any configuration, the system combines these
VLANs together in the format of vlan-id to vlan-id when displaying the VLAN
configuration information.
Related
saved-configuration.
Examples
# Display the VLAN configuration information of the current switch.
<Sysname> display current-configuration vlan
#
vlan 1
#
commands: save, reset saved-configuration,
1-6
Chapter 1 Configuration File
Management Commands
display