Port-Security Max-Mac-Count - H3C S3100 Series Command Manual

Command Manual ( For Soliton ) – Port Security-Port Binding
H3C S3100 Series Ethernet Switches
System View: return to User View with Ctrl+Z.
[Sysname] interface Ethernet 1/0/2
[Sysname-Ethernet1/0/2] port-security authorization ignore

1.1.7 port-security max-mac-count

Syntax
port-security max-mac-count count-value
undo port-security max-mac-count
View
Ethernet port view
Parameters
count-value: Maximum number of MAC addresses allowed on the port, in the range of 1
to 1024.
Description
Use the port-security max-mac-count command to set the maximum number of MAC
addresses allowed on the port.
Use the undo port-security max-mac-count command to cancel this limit.
By default, there is no limit on the number of MAC addresses allowed on the port.
Note:
By configuring the maximum number of MAC addresses allowed on a port, you can:
Limit the number of users accessing the network through the port.
Limit the number of security MAC addresses that can be added on the port.
When the maximum number of MAC addresses allowed on a port is reached, the port
will not allow more users to access the network through this port.
Caution:
The port-security max-mac-count command is irrelevant to the maximum number
of MAC addresses that can be learned on a port configured in MAC address
management.
When there are online users on a port, you cannot perform the port-security
max-mac-count command on the port.
Chapter 1 Port Security Commands
1-12