Display Ip Interface Brief - H3C S6812 Series Command Reference Manual

Field
ICMP packet input number:
Echo reply:
Unreachable:
Source quench:
Routing redirect:
Echo request:
Router advert:
Router solicit:
Time exceed:
IP header bad:
Timestamp request:
Timestamp reply:
Information request:
Information reply:
Netmask request:
Netmask reply:
Unknown type:
Related commands

display ip interface brief

ip address
display ip interface brief
Use display ip interface brief to display brief IP configuration for Layer 3 interfaces.
Syntax
display ip interface [ interface-type [ interface-number ] ] brief [ description ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type: Specifies an interface type. If you do not specify an interface type, this command
displays brief IP configuration for all Layer 3 interfaces.
interface-number: Specifies an interface number. If you do not specify an interface number, this
command displays brief IP configuration for all Layer 3 interfaces of the specified type.
description: Displays complete interface descriptions. If you do not specify this keyword, the
command displays a maximum of 13 characters for each interface description. If the description is
longer than 13 characters, the first 10 characters are displayed, followed by an ellipsis (...).
Usage guidelines
Information displayed by the command includes the state of the physical and link layer protocols, IP
address, and interface descriptions.
Description
Total number of ICMP packets received on the interface (statistics start at
the device startup):
•
Echo reply packets.
•
Unreachable packets.
•
Source quench packets.
•
Routing redirect packets.
•
Echo request packets.
•
Router advertisement packets.
•
Router solicitation packets.
•
Time exceeded packets.
•
IP header bad packets.
•
Timestamp request packets.
•
Timestamp reply packets.
•
Information request packets.
•
Information reply packets.
•
Netmask request packets.
•
Netmask reply packets.
•
Unknown type packets.
3