H3C S3100 Series Command Manual page 413

Command Manual (For Soliton) – AAA
H3C S3100 Series Ethernet Switches
Description
Use the display domain command to display configuration information about one
specific or all ISP domains.
Related commands: access-limit, domain, scheme, state.
Examples
# Display configuration information about all ISP domains.
<Sysname> display domain
0 Domain = system
State = Active
Scheme = LOCAL
Access-limit = 512
Vlan-assignment-mode = Integer
Domain User Template:
Idle-cut = = Enable Time = 60(min) Flow = 200(byte)
Self-service URL = http://aabbcc.net
Messenger Time Maxlimit = 30(min) span = 10(min)
Default Domain Name: system
Total 1 domain(s).1 listed.
Table 1-2 Description on the fields of the display domain command
Domain
State
Scheme
Access-Limit
Vlan-assignment-mode
Domain User Template
Idle-Cut
Self-service URL
Messenger Time
Default Domain Name
Field
Domain name
Status of the domain, which can be active or block.
AAA scheme that the domain uses
Maximum number of local user connections in the
domain
VLAN assignment mode, which can be Integer or String.
Domain user template settings, that is, attribute settings
for all users in the domain.
Status of the idle-cut function
Self-service URL for password changing
Settings of the messenger time service, which is for
reminding online users of their remaining online time.
The setting in this example indicates that the system
starts to remind an online user (at an interval of 10
minutes) when the remaining online time is 30 minutes.
Default ISP domain of the system
Chapter 1 AAA Configuration Commands
Description
1-13